Solid wood flooring Kitchen Cabinets Sacramento has higher requirements to base treatment
Solid wood flooring Kitchen Cabinets Sacramento is the floor laid directly on the floor of the base, because real wood floor shop less occupied space, simple construction, short construction period, and is suitable for room height Low buildings.
Solid wood flooring on the primary processing requirements higher, should first do moisture proof processing at the grassroots level, the general use of linoleum, can also be used in other waterproof coating surface. In the damp proof layer with fine stone concrete leveling, surface with 107 glue scraping mud filled again, makes the surface roughness within 2 mm.
After scraping maintenance, to be completely dry, the ground moisture content below 7%, start paving the floor.
Wooden floor Kitchen Cabinets Sacramento decking before the deal with basic cleaning, ensure the primary formation, solid clean, no grease or dirt, clean up, control of linear elastic pavement.
Wooden floor decking should pay attention to the brush glue with paste, such as the use of chloroprene rubber adhesive, should also brush wood floors in the back and ground base glue, such as the use of emulsion adhesives, only in the base glue.
Plastic surface should be painted in uniform, brushing glue, then paste the wood floor, squeeze adjacent floor, make it tight, the gap is uniform, and then use the hammer gently tap the face, and the local bonding.
Post processing method and air solid wood flooring solid wood floor shop the same.
Standard after the installation of the solid wood floor is easy to use, as long as the attention does not damage the film can be used for a long time, usually with a damp mop gently clean surface dirt can be, if the conditions can be a waxing maintenance every half a year.
Methods to replace the solid wood floor is more complex, should drilling small holes, series of replacing wood, pay attention not to drill too deep, in order to prevent the drill into the big core board.
Then split down the middle, to remove the damaged slab, the adjacent convex rod chisel, the new plate fell to half plane convex.
The new board all connected surface brushing adhesive, inserted into the adjacent grooves, the new board in the original position, the surface drilling, nailing with adhesive nail, the nail into the plate, finally the late treatment.
Solid wood flooring Kitchen Cabinets Sacramento in the long-term use or want to adjust the ground color, can be rebuilt, method is: remove the surface film, re grinding, putty, paint, paint brush the floor, the floor to its original shape and appearance. In the removal of surface film, the scavengers were.